Skip to content

Feruga NPS Mid-Low Launch Wood Shaft Review: Which of Six Fits?

The Feruga NPS is a $325 wood shaft, handmade in Korea, and I think it’s worth a fitting if you want a stable shaft with a mid to low flight, as long as you pick the right one of the six.

Is the Feruga NPS Mid-Low Launch Wood Shaft worth buying?

Feruga is a Korean shaft company, and the NPS is its mid to low launch shaft for drivers and fairway woods. The pitch is pretty simple. A shaft that’s built by hand and built to twist less.

Now, here’s what you need to know before you get excited. The NPS isn’t one shaft. It’s six. And the lightest one and the heaviest one aren’t even built to launch the same way.

So let’s get into what each option is built to do, what Feruga’s Triple Torque Technology actually is, how the build works, and who should skip it.

Quick Overview

  • You can buy it raw or have Feruga build it into your driver or fairway wood.
  • There are six options: 5S, 5X, 6S, 6X, 7S and 7X. That’s two flexes in three weights.
  • The two lightest are listed as mid launch, and the 6X, 7S and 7X are low launch.
  • Feruga’s listed weights run from 60 grams up to 75.
  • It’s handmade in Korea, with bias plies wrapped at the tip and butt to cut down on twisting.
Feruga NPS Mid-Low Launch Wood Shaft
4.5
$325

The Feruga NPS Mid-Low Launch Wood Shaft is perfect for golfers seeking a steady, straight ball flight. Experience optimal performance and a mid to low trajectory with this innovative golf shaft.

Pros:
  • Highly stable with triple torque tech
  • Lightweight for faster swing speed
  • Precise mid-low launch control
Cons:
  • Firm feel may not suit all players
  • Premium price point
  • Best for specific launch preferences
Buy on Feruga

Feruga NPS Spec Sheet

These are Feruga’s published numbers for the current Feruga NPS Mid-Low Launch Wood Shaft 2nd Gen. They’re nominal numbers, not a measurement of the shaft that shows up at your door.

SpecFeruga NPS 2nd Gen
Price$325 on Feruga’s site
UseDriver and fairway wood
Made inKorea
Flex labelsS and X
Store weight classes50, 60, 70
5S60 g, 245 CPM, torque 3.7, mid launch, mid kick point
5X61 g, 255 CPM, torque 3.7, mid launch, mid kick point
6S66 g, 255 CPM, torque 3.5, low-mid launch, mid-high kick point
6X68 g, 265 CPM, torque 3.5, low launch, high kick point
7S72 g, 265 CPM, torque 3.2, low launch, high kick point
7X75 g, 275 CPM, torque 3.2, low launch, high kick point
TolerancesWeight plus or minus 2 g, CPM plus or minus 2, torque plus or minus 0.3
Tip diameter0.335 inch
Raw shaft length46 inches, uncut
Standard driver build45.5 inches total club length
Build optionsRaw shaft, custom driver, custom fairway; right or left hand; adapter and grip choices

The Weight You Pick Changes the Launch, Not Just the Flex

Here’s the first thing to get straight about the NPS. It’s not six flexes. It’s two flexes, S and X, in three weights. That’s six combinations.

And the weight is what moves the flight. The 5S and 5X are both listed as mid launch with a mid kick point. Step up to the 6S and it’s low-mid. The 6X, 7S and 7X are all low launch with a high kick point.

So two shafts can both say S on them and be built to do completely different things. The 5S is listed at 60 grams. The 7S is 72 grams, and it’s built to launch lower.

Then there’s the store. When you go to order, the options say 50, 60 and 70. Those are weight classes, not grams. The lightest NPS on Feruga’s chart is 60 grams, so if you’re shopping for a true 50-gram driver shaft, this isn’t it.

One more thing. The 5X and the 6S both list 255 CPM. Same frequency, but the 6S is heavier and built to launch lower. So don’t pick off one number. Pick off the whole row. And if you’re not sure which row you are yet, here’s how to pick the right shaft for your clubs before you order on a guess.

Triple Torque Technology Is Built to Keep the Shaft From Twisting

Feruga calls its main construction Triple Torque Technology. Here’s what it actually is. They wrap bias plies at plus and minus 45 degrees, three in each direction, and they use them to reinforce the tip and the butt of the shaft.

Yellow Feruga golf shaft indoors

Basically, Feruga is reinforcing both ends of the shaft so it twists less through the hit. That’s the whole idea, and they sell it on stability and tighter dispersion.

That tells you who Feruga built this for. It’s the golfer who wants a stable shaft and a mid to low flight, not the guy hunting for a soft, kicky shaft to help him get the ball up.

You’ll also see the NPS called an anti-left shaft. I wouldn’t buy it on that. Feruga sells it on stability, not as a hook fix. If left is your miss, hit the heavier, low-launch options against the shaft you’ve got now and watch where the ball starts. That tells you more than any label will.

It’s Handmade in Korea, and Feruga Recycles Any Shaft That Misses Its Numbers

Feruga builds its shafts by hand in Korea, and the rest of the story is about what goes into them.

It uses low-resin graphite sheets, picked for their fiber content, weight and strength. It changes the taper and the materials along the length of the shaft to balance the strength from one end to the other. Feruga calls those Low Resin Contents and Multi Taper Technology. You’re not going to feel an acronym, but it tells you there’s more going on in there than one kind of graphite rolled into a tube.

Then it gets painted, and Feruga says every shaft is hand-sanded more than twice along the way. Anything that comes out of spec gets recycled, and Feruga says there are no exceptions.

So what does that mean for you? The shaft you get should land close to the chart. Close, not exact. Feruga publishes a tolerance on every number, so a 60-gram 5S can come in a gram or two either side and still be in spec. And honestly, I like that they publish the tolerances at all. It tells you what you’re actually buying.

You Can Buy It Raw or Built Into Your Driver or Fairway Wood

On Feruga’s site you’ve got three ways to buy the NPS. The raw shaft, a custom driver build or a custom fairway build. Then you pick right or left hand, your adapter and your grip.

Don’t mix up the length, though. The 46 inches on the spec chart is the uncut raw shaft. It’s not how long your driver is going to be. Feruga’s standard driver build is 45.5 inches, and that’s the whole club, from the bottom of the head to the end of the grip.

Yellow and black golf shaft on turf

And don’t assume it’ll drop into whatever’s in your bag. The builder lists different adapters for drivers and fairways, so pick your exact head and adapter before you pay. Same goes for the price. The $325 is the shaft on Feruga’s site, and your final total depends on the build you pick.

If you’ve never been fitted for a driver, watch my PXG Black Ops Ultralite fitting. The fitter kept the shaft the same weight and flex profile, so the only thing changing was the head. Flip that around for the NPS. Keep your head the same and swap the shaft, so you know it’s the shaft that moved your numbers.

What I Don’t Love

Here’s the catch. If you swing it slower and you need a regular flex, this shaft is not for you, no matter how well it’s built.

The other downside is the launch. If you need help getting the ball in the air, Feruga labels its PBS as its high-launch wood shaft, and that’s where I’d look instead.

And the product page doesn’t spell out the return terms for a shaft that’s been cut and built into a club. That’s real money to have stuck in a shaft you can’t use, so ask before you order.

Feruga NPS Mid-Low Launch Wood Shaft
4.5
$325

The Feruga NPS Mid-Low Launch Wood Shaft is perfect for golfers seeking a steady, straight ball flight. Experience optimal performance and a mid to low trajectory with this innovative golf shaft.

Pros:
  • Highly stable with triple torque tech
  • Lightweight for faster swing speed
  • Precise mid-low launch control
Cons:
  • Firm feel may not suit all players
  • Premium price point
  • Best for specific launch preferences
Buy on Feruga

Who It’s For

Buy it if:

  • You swing fast enough for S or X flex and you want a lower, steadier flight off the tee.
  • You’re going to get fitted, or at least test it against the shaft you’ve got now.
  • You want a heavier, low-launch option in the 68 to 75 gram range.
  • You want the shaft, adapter and grip built into your driver or fairway wood in one order.

Skip it if:

  • You need a regular or softer flex. Feruga only lists the NPS in S and X.
  • You need a higher launch. Look at Feruga’s PBS instead.
  • You’re hoping a shaft will fix a hook or a slice all by itself.

Frequently Asked Questions

What flexes does the Feruga NPS come in?

On Feruga’s site, just two, S and X. Feruga offers each one in three weights, so you get six options: 5S, 5X, 6S, 6X, 7S and 7X. If you need a regular flex, the NPS isn’t the one.

How much does the Feruga NPS weigh?

Feruga lists the six options from 60 grams for the 5S up to 75 grams for the 7X. The 50, 60 and 70 you see on the store are weight classes, not the actual weight in grams.

Is the Feruga NPS a low launch shaft?

It depends on which one you get. The 5S and 5X are listed as mid launch, the 6S is low-mid, and the 6X, 7S and 7X are low launch. So the heavier you go, the lower Feruga says it’s built to fly.

Can you put the Feruga NPS in a fairway wood?

Yes. Feruga sells it raw or as a custom driver or custom fairway build, with your choice of adapter and grip. Just make sure the builder has the right adapter for your head.

Will the Feruga NPS fix a left miss?

I wouldn’t count on it. Feruga built it to twist less and fly mid to low, not to straighten out a hook. Test the heavier options against your current shaft and let the ball flight tell you.

Final Thoughts: Feruga NPS Mid-Low Launch Wood Shaft Review

If you swing it fast enough for S or X and you want a steadier, lower flight, the NPS is a $325 shaft worth putting in your fitting. Go in knowing which option you’re testing, and once one of them wins, order it through Feruga’s builder with your head and adapter picked. And if you’re still sorting out what you even need in a shaft, start with my ultimate guide to golf shafts.

Paul Liberatore

About the author

Paul Liberatore

Paul Liberatore is the founder of Golfers Authority and a former three-year golf gear contributor to Sports Illustrated. He tests golf equipment hands-on to help golfers make better buying decisions.