Yes, if your misses go left and right from the same spot and you want the face to hold square on its own. The One & Done ZT sells for $449.99. The shaft runs into the head over its center of gravity, and polymer fills more than half the head so mass moves out to the edges. Skip it if you swing a strong arc. You’ll lose the release feel you rely on.
PXG launched the One & Done ZT on July 30, 2026. It’s the smallest and most normal looking putter in the company’s zero torque family. That family already includes the Bat Attack ZT, the Hellcat ZT and the Hot Rod ZT. The earlier ones asked you to stare down a hosel shape most golfers found strange. This one doesn’t. The category itself belongs to L.A.B. Golf, whose VZN.1i is the putter almost every buyer holds this one up against. Bettinardi sells the Antidote SB1 at the same money in a blade shape. Odyssey comes in under all of them with the Ai-ONE Square 2 Square. That design squares the face with a different hosel trick, not the weighting the other three share. The real question isn’t whether zero torque does anything. It’s whether PXG’s take on it earns $449.99 when the field sits within fifty dollars in either direction.
Here’s what makes this one different from the rest of the shelf. The head is a hollow 303 stainless steel shell, not a solid casting and not a milled billet. PXG injects its own S-COR polymer inside, the same material it uses in the 0311 irons, and that fill takes up more than half the interior. The saved mass gets pushed out to the perimeter. The face is a 0.055 inch stainless insert with a pyramid milling pattern cut into it, sitting right against that polymer. There’s a 2 degree forward press built into the hosel. Two swappable weights sit in the sole, and the grip is shaped to match the lean. I haven’t had this putter in my own hands, so everything below comes from PXG’s published specs and the record around it. Where a claim is the company’s rather than a measured result, you’ll see me say so.
Engineered for dead-straight consistency, the PXG One & Done ZT (Zero Torque) eliminates face twist throughout the stroke. Featuring high-MOI mallet stability, advanced multi-material construction, and precision perimeter weighting, this putter keeps the face square to your path effortlessly from takeaway to impact.
Quick Overview
- Price is $449.99, and it has been $449.99 since the July 30, 2026 launch with no markdown yet.
- The head is hollow 303 stainless steel with S-COR polymer filling more than half the internal volume.
- The face insert measures 0.055 inch thick with a pyramid milled pattern, backed by polymer instead of a soft insert.
- Loft reads 5 degrees at the face but plays like 3 degrees because of a 2 degree forward press in the hosel.
- Stock retail lengths are 34 inches or 35 inches, with fitting available at more than 200 PXG locations.
Specs
| Spec | Detail |
|---|---|
| MSRP | $449.99 |
| Release date | July 30, 2026 |
| Head style | Mid-size mallet |
| Hosel | Onset, center-shafted zero torque geometry |
| Body | Hollow multi-material 303 stainless steel |
| Internal fill | S-COR polymer, more than half the internal volume |
| Face | Stainless steel insert, 0.055 inch thick, pyramid milled |
| Loft | 5 degrees measured, plays as 3 degrees effective |
| Forward press | 2 degrees, built into the hosel |
| Lie angle | 68 to 72 degrees |
| Lengths | 34 inches or 35 inches at retail |
| Head weight | Not published by PXG |
| Weighting | Two interchangeable sole weights, gram range not published |
| Grip | PXG Slant family, 1.5 degree slant angle |
| Handedness | Right and left |
| Fitting | 200-plus PXG locations, free spec check within a year |
The Hollow Steel Body Is Why This Head Resists Twisting
The stability here comes from what PXG took out of the middle of the head, not from what it bolted on. A solid putter head carries its mass wherever the casting puts it. This one is different. It’s a hollow 303 stainless shell with S-COR polymer filling more than half the inside. That frees up weight, and the freed weight gets moved to the outer edges. It’s textbook perimeter weighting, the same trick that made cavity back irons more forgiving than blades. More mass at the edges means the head fights the twist you put into it when you miss the center of the face.
PXG says this is the highest moment of inertia it has ever built into a putter. The company doesn’t publish an MOI figure for it. So you’re taking that on trust rather than reading it off a spec sheet. The construction supports the direction of the claim. The size of it isn’t something you or I can check.
The other half of the design is the hosel. The shaft enters the head over the center of gravity instead of bending around it. That creates a toe-up balance point, and a toe-up head resists opening and closing. PXG got there before with an S-shaped hosel on the Bat Attack ZT. Plenty of golfers took one look at that shape and walked away. The onset hosel does the same job and still looks like a putter. If the geometry is what you wanted and the styling is what kept you out, this is the version that answers your objection.
The 0.055 Inch Milled Face Handles Roll Without a Soft Insert
The face is a stainless steel insert measuring 0.055 inch thick with a pyramid pattern milled into it. It sits flush against the polymer behind it rather than against a soft rubber or foam layer. That layout is the reason a hollow steel head doesn’t ring like a bell at impact.
Most putters solve sound and feel one of two ways. They either mill the face and accept a firmer, clickier strike. Or they drop in a soft polymer insert and give up some of the crisp feedback a milled face gives you. PXG is trying to have it both ways, keeping the milled face and putting the damping behind it instead of in front. The published accounts describe the result as soft and controlled rather than dead. Call it partly confirmed. Nobody has run this face through a standardized panel yet, and I’m not dressing up early impressions as a lab result.
The pyramid milling itself is about grip at impact. A deeply milled pattern bites the cover for a fraction longer, and that cuts the skid. The ball starts rolling end over end sooner. Less skid usually shows up as better distance control on lag putts, because the ball behaves the same way every time.
The thin face matters for a second reason. Shaving it to 0.055 inch is another way to free up mass, and that mass goes to the perimeter where it does the forgiveness work. PXG has also called this its thinnest putter face. I couldn’t verify that against a published spec for its other models, so treat it as marketing rather than settled fact. The number itself is real, and 0.055 inch is thin for a putter insert.
Zero Torque Only Pays Off If Your Stroke Wants It
Zero torque geometry helps one kind of golfer a lot and does almost nothing for another. At $449.99 that’s an expensive thing to learn afterward. The design takes face rotation out of your stroke. If face rotation isn’t what’s costing you putts, you’re paying to fix a problem you don’t have.
The golfer this is built for misses on both sides. You push a five footer, then you pull the next one, and the read was fine both times. That pattern comes from hands and wrists doing work the putter should be doing. An onset hosel and a toe-up balance point are built to shut that down. Newer golfers land in the same bucket, since the off-center forgiveness is doing a second job for them.
The golfer this is wrong for has a pronounced arc and likes feeling the head release. That feedback is a real part of how a lot of players judge pace, and a zero torque head takes it away. I ran into that myself with PXG’s Hot Rod ZT. It’s the milled aluminum sibling that sells at this same $449.99, and I put three weeks into it on camera.
Watch: I NEVER thought PXG Would Do This to a Putter?
That video is the Hot Rod ZT, not this putter. Read it as evidence about the geometry, not about this head. What carries over is the adjustment period. In it I say the head felt strangely neutral and that I hated it for the first hour on the practice green. Then it clicked on fast greens, where my hands normally get busy. Same hosel concept, same trade, different body. If you’re shopping zero torque for the first time, budget a few sessions before you judge it.
Two Sole Weights Give You a Tuning Option the Fixed Rivals Skip
Of these four putters, this is the one that lets you change the head weight after you buy it. Two interchangeable weights sit in the sole. PXG doesn’t publish the gram range for them, which is annoying. The mechanism is still there, and the rivals in this tier don’t offer one.
Head weight isn’t a gimmick spec. It’s the easiest lever you have for pace control. A heavier head suits a slow, smooth stroke, and it tends to steady you on quick greens. The mass carries the ball instead of your hands accelerating into it. A lighter head suits a shorter, quicker stroke and slower surfaces. Most golfers never touch this, because most putters don’t let them. So they adapt to the club instead of the other way around.
There’s a seasonal argument too. Greens aren’t the same speed in April as they are in August, and a putter you can add weight to is one you can rebalance when they change under you.
Compare that against what else you can buy. The VZN.1i from L.A.B. Golf is built to a fixed spec once you order it, though it does let you choose your shaft lean at purchase. Bettinardi’s Antidote SB1 and the Odyssey Ai-ONE showed no post-purchase weight adjustment in the material I went through. So the flexibility here is genuine. It’s one of the few places where PXG is offering something structural rather than something cosmetic. Pair it with the fitting network and you get two ways to make the club fit you. On a putter that matters more than on almost any other club in the bag.
You Give Up $50 and Some Head Size Against the VZN.1i
L.A.B. Golf’s VZN.1i is the benchmark in this category. The honest read is that these two land close enough that head size and feel decide it, not performance. Here’s how the four stack up.
| Putter | Price | Balancing method | What it gives you |
|---|---|---|---|
| PXG One & Done ZT | $449.99 | Onset hosel over the center of gravity | Two sole weights, smaller mallet head |
| L.A.B. VZN.1i | $499 stock | Lie angle balanced | Bigger head, choice of 0 or 1.5 degrees of lean |
| Bettinardi Antidote SB1 | $450 | Heel-shafted, minimal onset | Blade silhouette with zero torque behavior |
| Odyssey Ai-ONE Square 2 Square | From $349.99 | Square to square hosel | Cheapest way in, different mechanism |
The published head-to-head between the PXG One & Done ZT and the L.A.B. Golf VZN.1i came out split. Both rolled the ball cleanly end over end. Both made short putts easy. The PXG’s smaller head and heavier feel got the nod on longer putts, where pace matters most. The L.A.B. took the short, delicate ones. One flag is worth repeating. At address the PXG appeared to allow a touch more twisting, which is the opposite of the design’s whole promise. That was an eyeball impression at setup, not a measured stroke result.
Price is the cleaner separator. You save $50 buying the PXG, and you give up the ability to pick your shaft lean. The 2 degree press here is fixed in the hosel. If lean choice matters to you, that’s worth the money, and my L.A.B. DF3 coverage shows how that family behaves. If you want the smaller head and the tuning weights, PXG is the better buy and it costs less.
Shape is the other separator, and it isn’t a small one. The One & Done ZT is a mid-size mallet, sitting between a blade and the big rear-weighted heads that dominate the category. If you’ve never settled that question, my blade versus mallet breakdown is the place to start. Buying the right technology in the wrong silhouette is how a $449.99 putter ends up in the garage.
What I Don’t Love
The grip is going to catch people out. The forward press is engineered into the hosel rather than achieved by twisting a normal grip during installation. So the club needs an asymmetrical slant grip to work as designed. It’s large, it’s shaped oddly, and picking it up cold you’ll wonder what you’re holding. A custom order can swap which slant model you get. It can’t remove the slant itself. There’s a second wrinkle. The stock grip has been described differently in different places, Slant 1.5R in one account and Slant Pistol R in another, so confirm it on the SKU you’re buying.
Then there’s the paperwork problem. PXG doesn’t publish the head weight, the gram range of the two sole weights, whether a headcover is included, or a warranty term. For a $449.99 club that’s a lot of unanswered questions. Get those answers from the retailer before you pay, not after. One more small thing. A logo cutout near the heel bothered at least one account when striking putts deliberately off center. That matters if you play toe strikes on delicate putts on purpose.
Engineered for dead-straight consistency, the PXG One & Done ZT (Zero Torque) eliminates face twist throughout the stroke. Featuring high-MOI mallet stability, advanced multi-material construction, and precision perimeter weighting, this putter keeps the face square to your path effortlessly from takeaway to impact.
- Exceptional Stability.
- High MOI in a Smaller Package.
- Crisp Feel and Consistent Roll.
- Firmer Face Response.
- Visual Styling Choices.
- Stock Grip Preference.
Frequently Asked Questions
Is the ZT putter worth it?
It’s worth it for the golfer who can’t keep the face square, and it’s a waste of $449.99 for everybody else. Zero torque geometry solves one fault, the face rotating open or closed because your hands are doing work the putter should do. If you push and pull putts from the same distance with a good read, this targets your exact miss. If your problem is green reading or pace, you’re buying somebody else’s solution. Try one first, because the feel is a real adjustment.
Which PXG putter is considered the best?
There’s no single answer, because PXG’s zero torque line splits by shape rather than by quality. The One & Done ZT is the mid-size mallet at $449.99, with adjustable sole weights and a hollow steel body. The Hellcat ZT gives you the same balancing idea in a blade silhouette. The Hot Rod ZT costs the same but is milled from one block of 6061 aluminum, with four sole weights spanning 345 to 415 grams. Pick the shape you can look down at first, then the build.
What is the best ZT putter?
L.A.B. Golf still owns this category by reputation, and the VZN.1i at $499 stock is what the rest get measured against. The One & Done ZT gets close for $50 less in a smaller head, and the one direct on-course comparison came out roughly even on roll and short putts. Bettinardi’s Antidote SB1 is the pick if you want zero torque in a blade shape. The Odyssey Ai-ONE starts at $349.99 and is the cheapest way in, though it gets there through a different hosel design rather than true weighting.
Are PXG putters worth the money?
At $449.99 you’re paying for engineering that shows up in the specs, not for a badge. The hollow 303 stainless body, the polymer fill, the 0.055 inch milled face and the two sole weights are checkable things rather than marketing language. Whether that’s worth it depends on your miss. A golfer fighting face rotation gets a genuine fix. A golfer who already putts well with a blade gets an expensive lesson in a feel he may not like. PXG’s fitting network at more than 200 locations is part of the value.
Is PXG for high handicappers?
Yes, and this putter in particular suits that group. Higher handicap golfers tend to strike the ball away from the center of the face and steer the club with their hands. Perimeter weighting and an onset hosel are built to absorb both. The forgiveness on off-center hits takes no skill to access. The one caution is price. If you’re $449.99 into a putter while the rest of your bag holds you back, spend the money on the clubs you hit far more often.
Final Thoughts: PXG One & Done ZT Putter Review
The One & Done ZT is PXG making its zero torque geometry easy to look at, and that’s a bigger deal than it sounds. The technology was never the barrier. The shapes were. Plenty of golfers who’d have benefited from the Bat Attack ZT or the Allan never got past the hosel. This is a mid-size mallet you can set down behind a ball without flinching, and it brings a hollow steel body, a polymer fill, a thin milled face and two tunable sole weights to $449.99. That’s a fair amount of engineering for the money in a category where $499 is the going rate at the top.
I’d buy it if I pushed one putt and pulled the next and wanted the face taken out of my hands. I’d want that slant grip in my palm at a store before I paid. I wouldn’t buy it if I had a working arc stroke and liked the release, because this putter deliberately removes the thing I’d rely on. The unpublished head weight and the missing warranty term are worth a question at the counter. Beyond that, this is the most approachable zero torque putter PXG has built, and the fitting network behind it is a real reason to buy it here.
About the author
Paul Liberatore
Paul Liberatore is the founder of Golfers Authority and a former four-year golf gear contributor to Sports Illustrated. He tests golf equipment hands-on to help golfers make better buying decisions.